11
WINYCAM BRAVO
사
용
하
기
How to use
1.
Record
: BRAVO is automatically boot at power on, and a constant(normal) recording starts as an initial recording mode.
2.
Recording Mode
: it is classified into driving recording mode and parking (motion) recording mode
3.
Recording Method
: it is classified into a Normal recording, event recording, motion recording.
※ For automatic recording and manual recording methods, please refer the below table.
※ After change to parking recording mode by manual, if you want to change normal recording
mode again, please press “REC” button for 3 seconds
(During event recording, the mode cannot be changed.)
REC
Mode
Driving
Mode
Parking
(Motion)
Mode
REC
Method
Normal REC
Normal
-
-
Set 30 / 60 / 120
sec in configuration
Event REC
Event
In G-sensor detect shock
One short press
button
Motion REC
Motion
In G-Sensor is not
detected for more than
10 minutes Auto change
to a motion REC mode.
Before 10 sec,
after 20 sec
Event/Motion detect
Event REC
Event
In G-sensor detect
shock
One short press
button
Three sec
press button
Auto REC Mode
Manual REC Mode
(Button Control)
REC Time
Recording
folder
How to record