9
WINYCAM BRAVO
사
용
하
기
How to use
Rear Camera Installation
PLAY
Shutdown a vehicle battery and power off
BRAVO first before installing a rear camera.
(Disconnect the power connection)
1. Shutdown a vehicle battery and power
4. Connect video cable
2. Install a rear camera
5. Check an operation
3. Adjust a rear camera angle
6. Arrange a front/rear camera cable
After checking recording operation, well-
arrange a cable.
If you embed cable to vehicle wall, please
check cable connection. Also after embedded
double-check if BRAVO can record properly.
Remove a protect sticker and attach a rear
camera in proper location in windshield.
Connect a rear camera jack(smaller side)
to a rear camera and a another jack(bigger
side) to R-CAM connection.
After attached a rear camera, adjust an
angle. Adjust angle is e right angle to lens
face or little downward facing.
After power on, Please check the recorded
image that is stored in Micro SD card if
BRAVO can record properly.
