15
Attaching & Resizing PTO Shaft
Before installation/maintenance, ensure both tractor and
attachment are stationary with the ignition key removed. Ensure all
safety guards are in place and cover the PTO shaft when extended,
ensure the sprung locking collar slides freely and is securely in the
groove on the PTO. Always replace worn/damaged
PTO shafts.
Most PTO driven attachments are supplied with a standard size PTO shaft
which often requires resizing. Firstly, attach the rotovator to the tractor
without the PTO shaft, then raise the linkage so the PTO shaft is level/
horizontal. Measure the length between the tractor PTO and the
rotovator
’
s shaft. If the compressed (closed) PTO shaft length exceeds the
one measured here then the driveline will need to be cut.
16
Parts Diagram 1
Summary of Contents for WRT Series
Page 10: ...19 Notes 20 Parts Diagram 2 ...
