P A G E
|
3
Wintex Agro, Vilhelmsborgvej 15, DK-7700 Thisted
+45 97990800, [email protected], www.wintexagro.com
PREPERATION
Cleaning
It is essential that the WINTEX 1000 is thoroughly cleaned using a steam cleaner or de-greaser prior to work commencing. This will enhance the
ability to assess the serviceability of the machine and identify any necessary repairs.
Positioning
The soil sampler should be supported in such a way as to prevent it falling and provide a stable platform to work from. The figure below shows a
typical set up.
DATA & SPECIFICATION
Model:
WINTEX 1000
Samples per hour:
480
Probe volume:
300-450 g
Probe diameter:
18 mm, 21 mm
Hydraulic consumption:
7,5 l/min at 75-100 bar
Hydraulic fluid requirement:
4 litres
Electrical power:
12 V DC
Battery capacity:
14 ah, 250 w
Net weight:
47 kg
Dimensions:
H-970 mm, W-350 mm, D-350 mm
Service intervals:
Annually
*NOTE:
Before effecting any repairs or maintenance, both ends of the hydraulic cylinder should be connected together as shown below. This allows the hydraulic
oil to move around the system and thus be able to operate all parts of the machine during maintenance.
WARNING:
Steam cleaners use high pressure water
at a high temperature. Wear appropriate
PPE.
WARNING:
Risk of injury when lifting. Use mechanical
aid if possible.
