Winterthur Gas & Diesel Ltd. X52 Operation Manual Download | Manualshive

Page: 468 / 519

background image

12.8

List of lubricants for flywheel and pinion gear teeth

Always use lubricants for flywheel and pinion gear teeth related to the WinGD general lubricant
specifications and recommendations given in the Operation Manual.

The oil supplier assumes all responsibility for the performance of the lubricant used to the exclusion
of any liability of WinGD and of companies that are part of the WinGD group. The oil supplier along
with other possible manufacturers and distributors of the related products shall indemnify,
compensate and hold harmless WinGD and companies that are part of the WinGD group from and
against any claims, damages and losses caused by the used lubricants.

Tab 12-11 List of lubricants for flywheel and pinion gear teeth (16 October 2012)

Supplier

Brand

Lubrication Engineers Inc.

LE 5182 PYROSHIELD

Klüber Lubrication München KG

Klüberfluid C-F 3 ULTRA

X52

AA00-0000-00AAA-101C-A

Operation Manual

List of lubricants for flywheel and pinion gear teeth

Winterthur Gas & Diesel Ltd.

- 468 -

Issue 002 2018-11

«
...
466
467
468
469
470
...
»

Summary of Contents for X52








































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for X52

Brand: Rabe Pages: 65

Brand: GE Pages: 24

Brand: B. Braun Pages: 2

Aesculap Neurosurgery

Brand: B. Braun Pages: 13

Aesculap AdTec mini

Brand: B. Braun Pages: 2

Brand: B.Well Pages: 2

Brand: B. Braun Pages: 55

BA Ultimate LED

Brand: B.A. International Pages: 234

Brand: Olsen Pages: 4

Dominator Series

Brand: Falcon Pages: 31

Brand: Fakir Pages: 22

Brand: VBM Pages: 36

Brand: W&H Med Pages: 122

Brand: Wassermann Pages: 24

TOTAL KNEE 1900

Brand: Össur Pages: 58

Brand: Airway Pages: 2

Brand: Crazy Foil Pages: 8

Brand: Bowa Pages: 140

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands