Machine description
30 English
5 Machine
description
5.1 Operating
panel
The operating panel is to the right of the machine door.
1 On-off switch
2 Tank draining / self-cleaning
3 Indicator light for defect
4 Indicator light for insufficient detergent or rinse aid
1
5 Indicator light for exhausted water supply if this can
be determined from the water consumption
6 Normal washing cycle
7 Temperature indicator for boiler (when the machine is
warming up and if special programmes are activated)
8 Temperature indicator for tank (when the machine is
warming up and if special programmes are activated)
9 Function key; activates special programmes (10-13)
10 Short washing cycle
11 Temperature switching for rinsing (optional)
12 Cold water pre-wash (optional)
13 Intensive washing cycle
5.2 Mode of operation
The boiler and the tank fill up and are warmed up to the operating temperature after the machine is switched
on. The programme key (6) lights up in red during the warm-up phase.
When the desired temperatures (tank: approx. 60°C, boiler: approx. 85°C) are attained, the machine is ready
for operation. The start key (6) lights up in green.
The machine is operated with fully automatic programmes consisting of the programme steps Wash, Drain
and Rinse. The programme key (6) lights up in blue during the programme.
The rinse aid is usually supplied via an in-built dosing device. The storage container for the rinse aid is
placed outside the machine.
Depending on the design of the machine, the rinse aid is supplied either manually (powder) or via an in-built
or external dosing device (liquid detergent). The storage container for the detergent is placed outside the
machine.
1
Shows a defect in the detergent or the rinse aid if external drums with suction pipe and level monitoring are
used.
The indicator light flashes as soon as an empty drum is detected. If the drum has not been re-filled or
replaced after 20 washing processes, the indicator light lights up and the installed dosing device (if any) is
switched off.
