background image

Operation 

 

34 English 

 

6.2.4  Washing with special programmes 

 

  Press the function key (9). 

  The special programmes (10, 11, 12, 13) are 

also available in addition to the normal 

programmes (6). 

  The number depends on the design of the 

machine. All lit keys can be selected. 

  Temperatures in the tank (8) and boiler (7) 

are displayed (but not during the washing). 

  Press the function key (9) to deactivate the 

special programmes. 

 

6.2.5 Special programmes 

Key 10 
Short programme 

for slightly dirty dishes 

short / no drying time 

Activate mode:

 Press button 10 

Start mode:

 Press button 6 

The special programme remains saved till 

another special programme is selected or key 9 

is pressed. 

 Key 

13 

Intensive programme 

for heavily dirty dishes 

Long drying time 

Activate mode:

 Press button 13 

Start mode:

 Press button 6 

The special programme remains saved till 

another special programme is selected or key 9 

is pressed. 

 

 

 

 

 

 

Key 11 
Programmes with reduced rinsing 
temperature (optional equipment) 

For washing glasses 

 

Activate mode:

 Press button 11 

The rinsing temperature is displayed in 

display 7. 

The first wash cycle is carried out with high 

rinsing temperature. 

 

Start mode:

 

Short programme: Press key 10 and then key 6 

Intensive programme: Press key 13 and then 

key 6 

Normal programme: Press button 6 

  Key 11 flashes till the washing is carried out 

with reduced rinsing temperature. 

 

At the end of the mode:

 

Press key 11 or key 9 again to deactivate the 

reduction in the rinsing temperature. 

 

 Key 

12 

Mode with manual cold water pre-wash 
(optional equipment) 

For washing cutlery with albuminous dirt (meat 

and blood remains). 

The cutlery is first rinsed with cold water and 

then cleaned in the normal programme. This 

prevents the coagulation of the albuminous dirt. 

 

Activate mode:

 Press button 12 

Keys 10 and 13 are no longer lit and cannot be 

selected. 

 

Start mode: 

Press button 6 

  Key 12 flashes till the cold water pre-wash 

is on. 

 

At the end of the mode:

 

Press key 9 again to deactivate the cold water 

pre-wash. 

 

 

Summary of Contents for GS630





























Reviews: