9
VOX ON / OFF
Holding [PTT], temporarily press [SET] to enable VOX. To
disable it, holding [PTT] and temporarily press [SET] again.
When VOX is enabled, the icon appears.
(For selection of VOX sensitivity, refer to F4.)
*While VOX is enabled, press of [PTT] is no longer required
during transmission. Just talk into the microphone area with
appropriate sound (depending on VOX sensitivity).
Tx / Rx Differrnt Channel Mode ON / OFF
Holding [PTT], temporarily press [CH] until LCD screen
shows to enable this feature. To disable it, holding [PTT]
and temporarily press [CH] again until disappears from
LCD screen.
*This feature is invalid in SOS channel.
Memory Channel
- Holding [CH], temporarily press [
▼
] to select memory
channel. The memory channel is marked with a .
- Holding [CH], temporarily [
▲
] to restore to the original
normal channel.
*For memory channel setting, refer to "Memory channel and
SOS channel setting."
Factory default: CH01 and CTCSS / DCS OFF.
SOS (Emergency) Channel
Hold [CH] for about 3 sec. to enable SOS channel until
shows on the screen. To disable SOS channel, hold [CH] for
about 3 sec. until disappears and then restore to the
original normal channel.
*For SOS channel setting, refer to "Memory channel and
SOS channel setting."
Factory default: CH01 and CTCSS / DCS OFF.
Summary of Contents for LP-4502+
Page 1: ...LP 4502 User s Manual LP 4502...
Page 23: ......