3
Operation Guide
Power ON / OFF
Hold
about 1 sec to power radio. While power ON,
hold
about 1.5 sec turn the power off.
Transmitting / Receiving
While holding [PTT], speak to the microphone area. LED
glows red during transmission. To receive, release [PTT].
LED glows green when receiving.
*Keep about 5~10 cm from microphone area when speaking
slowly and clearly.
Volume Adjustment
Momentarily press repeatedly on [
▲
] to adjust volume
louder. Momentarily press repeatedly on [
▼
] to adjust
volume lower. Press and hold [
▲
] or [
▼
] to swiftly adjust
volume. Do adjustment as you need.
*Caution: For external mic/ear user, adjust volume starting
from the lowest level.
Normal Channel Selection
Momentarily press [CH]. While channel number icon blinks,
temporarily press repeatedly on [
▲
] or [
▼
] to select
channel. To preset channel, temporarily press [CH], [CTS],
[SET] or [PTT].
Scan Channels
Momentarily press [CH]. While channel number icon blinks,
hold on [
▲
] or [
▼
] about 2 sec. to start scanning of channel.
Jumping of channel numbers increasingly or decreasingly
and the LCD show indicates scan in progress.
- Press [
▲
] or [
▼
] to change the channel scanning direction.
- When scanning and none of the signal is received,
pressing [SET] or [CH] will stop scanning and return to the
original channel.
Summary of Contents for LP-4502+
Page 1: ...LP 4502 User s Manual LP 4502...
Page 23: ......
