Wintec G-RAYS 2 WBT-201, User Manual

Page: 7 / 51

6
Power it (or switch its power on).
G-RAYS 2 will start acquisition.
When the Bluetooth is used as interface:
Ahead of Bluetooth connection, make sure the target
device to pair can support Bluetooth SPP master.
After pairing with G-RAYS 2, place it at suitable area where
it can best receive GPS signal for acquisitioning.
Activate the application software of paired device. G-RAYS
2 starts to provide GPS data.
Battery charging:
Connect G-RAYS 2 with USB cable and turn on power
source.
Charging can be done by USB cable connected to
computer r, power adapter or car cigarette lighter adapter.
Charging is in process even during G-ray is operating.