Refer to the chart below If this unit does not function properly. If the problem you are experiencing is not listed below or if
the instruction below does not help,set this unit to the standby mode,disconnect the power cord, and contact the nearest
authorised dealer or service centre.
General
Problem
Cause
Remedy
This unit fails to
turn on when
STANDBY/ON
button is
pressed, or
enters in the
standby mode
soon after power
has been turned
on.
The power cord is not connected or
the plug is not completely inserted.
Connect the power cord plug firmly into the
power socket.
This unit has been exposed to a
strong external electric shock(such as
lightning and strong static electricity.)
Set this unit in the standby mode. disconnect
the power cord, plug it back in after 30
seconds, then use it normally.
No sound.
Incorrect input or output cable
connections.
Connect the cables properly. If the problem
persists, the cables may be defective.
No appropriate input source has been
selected.
Select an appropriate input source with the input
selector buttons.
The volume is turned down.
Turn up the volume.
The sound is muted.
Press MUTE or any operation buttons of this unit
to cancel the mute and adjust the volume.
The input signals this unit is receiving
from a source such as CD-ROM
cannot be reproduced.
Play a source with signals that this unit can
reproduce.
Troubleshooting
The sound suddenly
goes off.
The sleep timer has turned the unit off.
Turn on the power, and play the source again.
The sound is muted.
Press MUTE to cancel a mute.
17