
Connecting the wireless subwoofer
14
Operating Your Sound Bar
1.Plug the power codes of the sound bar and subwoofer into
the AC power supply.
2
.
Press the
STANDBY
button(on the panel of the sound bar)
to turn on the sound bar.Press the power switch(on the rear
panel of the subwoofer) to turn on the subwoofer.
3.
The remote control aim at the r
press
Trigger
button on the remote control for 2
seconds.
is displayed on the the display of the
sound bar.
4.The remote control aim at the r
press
Trigger
button on the remote control until
to the LINK indicator (
LED) blinks quickly.
5.After 30 seconds,
Sy
Q
c:subwoofer
disappear
s
on the
display of the sound bar
,
The
sound bar and the subwoofer are now linked (connected).
6.You can enjoy better sound from the wireless subwoofer.
emote control sensor of the
sound bar,
Sy
Q
c:subwoof
emote control sensor of
Subwoofer,
Orange
green
light
on the subwoofer.
The Subwoofer's linking ID is not preset at the factory,So the
sound bar and subwoofer must be link. Please set the ID by
following the process below:
Before moving or installing the product, be sure to turn off
the power and disconnect the power cord.
If the sound bar is powered off, the wireless subwoofer will
be in the standby mode after 15 minutes.
If you use a device such as a wireless LAN Card,microwave
oven, Bluetooth equipment, or any other device that uses
the same frequency (2.4GHz) near the system,some sound
interruption may be heard due to interference.
The transmission distance of the wireless signal between
the main unit and sub is about 32 feet, but may vary depe-
nding on your operating environment. If a steel-concrete
or metallic wall is between main unit and the wireless sub-
woofer, the system may not operate at all, because the wi-
reless signal cannot penetrate metal.
If the main unit doesn't make wireless connection, follow
steps 1-4 above to retry the connection between the main
unit and wireless subwoofer.
The wireless receiving antenna is built into the wireless
subwoofer. Keep the unit away from water and moisture.
For optimal listening performance,make sure that the area
around the wireless subwoofer location is clear of any obs-
tructions.
Notes
30
30
30
30