-14-
OPERATION
DVD PLAYER OPERATION PART
The option of display language catalog is pre-
set to English. Please refer to Setup operation
Most of functions are operated by remote
control. Either operation of remote control and
front panel is effected when their buttons indi-
cate the same function
Preparation
Turn the TV on and select AV as the TV input
Switch on the stereo system power if the
player has been connected to stereo system.
Note:
some of buttons will have double
function. Please refer to DVB PART for those
buttons with DVB operation function.
STANDBY
When you press the buttons, the player will switch
to Standby status. When pressed again, the player
is returned to normal working status.
Note:
should you not wish to use the player,
please switch off the power by pressing the
power button
DVD player playback operation
This unit default status is DVB status. Please kindly
push DVD/DVB button to switch into the DVD
status.
PLAY
1. Push power button on the unit, and it displays
LOAD on the VFD which indicates normal
power supply.
(
Note:
The disc information appears after sev-
eral seconds if there is a disc after LOAD dis-
played otherwise appears NO DISC)
2. Press OPEN/CLOSE button to open disc tray.
OPEN will be indicated on the left upper of TV
screen.
3. Place a disc (8cm or 12cm) into the tray. (For
one- sided disc, position it with printed title
side facing up. For two-sided disc, position
side to be playback facing down)
4. Press OPEN/CLOSE again to close disc tray
CLOSE will display on the left upper of TV
screen, then shows “Reading” and “Loading”
will display on the VFD screen.
5. Press
PLAY
to playback disc. You may oper-
ate according to MENU indication after MENU
shows on the screen then press OK button to
playback. Some discs can play automatically
after loaded.
STOP
Press
STOP
button to stop playing. When play-
back is stopped, the unit records the point where
STOP was pressed (RESUME function). Press
PLAY again, and play will resume from this point.
Press
STOP
button twice, RESUME function will
be cancelled. RESUME function is suitable for discs
showing playing time during playback.
DivX discs have no such function.
SKIP-/SKIP+
Press
SKIP-/SKIP+
button on remote control dur-
ing playback. A chapter (DVD) or a track (CD) is
skipped back or ahead correspondingly each time
the button is pressed.
Note: SKIP-/+ buttons works as Page down/up in
MP3/DivX/JPEG CD playing menus.
F.FWD/F.RWD
Press
F.FWD/F.RWD
button on the remote control
during playback and the unit will enter fast
forward/reverse status. There are 4 speeds of
fast forward (reverse) available: x2, x4, x8, x20.
To return to normal play, press
PLAY
button on
player or remote control again.
Note:
1. Some discs have no such function.
2. For DIVX discs, if the played file is too small,
the speed levels of fast forward (reverse)
will only have x2 or x4.
SLOW
Press
SLOW
button on the remote control during
playback and the unit will enter slow forward/
reverse status. There are 4 speeds available: 1/
2, 1/4, 1/6, 1/7. To return to normal play, press
PLAY
button on player or remote control again.
Note:
Some discs have no such function
PAUSE/STEP
Press
PAUSE/STEP
button during playback, the
player will enter pause mode. If the button is
pressed again, the disc is advanced by one frame
(step). When the button is kept pressed, con-
secutive frame advance works. To return to nor-
mal play, press
PLAY
button.
Note:
Some discs have no such function.
NOTE:
During the playing of the introduction of a
movie, PAUSE/STEP, F.FWD, F.RWD, SLOW, SKIP-
/ SKIP+ may be ineffective.
NUMBER
(
0-9, 0/10 button
)
Press Number (0-9, 0/10) button and press OK
button allows you to directly access any desired
track while a disc is playing.
Note:
Some discs have no such function.
MUTE
Press
MUTE
button during playback, the player
shows mute picture and there is no audio output
PDVDX100S-100B-im.p65
06-5-16, 11:31
14
