Trouble
Analysis
Does not run
Runs for a short while only
Runs but not cooling
Water leak during
moving
Drain the condensate before moving.
Does not run and water full
indicator lights
Pull out the rubber plug to drain the water.
If it is often in this state, please contact
licensed service technician.
The protector trip or fuse is blown.
The plug is not properly plugged in.
Wait for 3 minutes and start again,
protector device may be preventing unit to work.
The following cases may not always be a malfunction, please check suggestions below before asking
for service.
The set temperature is close to room
temperature, you can lower the set temperature.
Air outlet blocked by obstacle.
Take the obstacle away.
A door or window is open.
Another appliance heat working like a
heater or lamp, etc. .
The air filter is dirty, please clean it.
Air outlet or intake blocked.
Set temperature is too high.
7
Troubleshooting
don't cool