Operating conditions
The protective device may trip and stop the appliance in the cases listed below.
COOLING
DRY
Room temperature is below
Room temperature is below
If the plug is taken out when you restart the appliance, it will return to the original mode.
Drain water
In COOLING or DRY operation, it is possible that water full indicator(red) lights up.Please
cut off the power supply, move the appliance to a suitable place to pull out the water plug
and drain the water. After this, be sure to re-install the plug or the appliance may leak and
make your room wet.
If the appliance is placed in a position admitting drain water, you also can connect the drain
hose to the drain port to drain water.
7
Protection
Features of protector
The protective device will work in the following cases.
Restarting the unit at once after operation stops or changing mode during operation, you need to
wait 3 minutes.
Connect to power supply and turn on the unit at once, it may start later.
If the air conditioner runs in COOLING or DRY mode with door or window opened for a long time when relative
humidity is above 80%,dew may drip down from the outlet.
18
(64
)
18
(64
)