PPM-C407/Before You Begin
v1.0
www.winsystems.com
Page 1
1.
Before You Begin
Review the warnings in this section and the best practice recommendations (see “Best
Practices” on page 53) when using and handling the WinSystems PPM-C407. Following
these recommendations provides an optimal user experience and prevents damage.
Read through this document and become familiar with the PPM-C407 before
proceeding.
1.1
Warnings
Only qualified personnel should configure and install the PPM-C407. While observing
the best practices, pay particular attention to the following:
2.
Introduction
This manual provides configuration and usage information for the PPM-C407. If you
still have questions, contact Technical Support at (817) 274-7553, Monday through
Friday, between 8 AM and 5 PM Central Standard Time (CST).
Refer to the WinSystems website for other accessories (including cable drawings and
pinouts) that can be used with your PPM-C407.
3.
Functionality
The PPM-C407 is a full-featured embedded single board computer that operates in the
Windows 7, Windows 8, Windows CE, Linux and DOS environments. It features an
Intel
®
Atom™ E3800 Processor, up to 4 GB soldered DDR3 RAM, PC/104 and PC/104-
Plus bus connectors (stack-through connectors are optional), as well as optional
fanless operation. It provides 24 lines of 5 V DC tolerant digital input-output (DIO), and
also video output with audio support. Communication interfaces include Gigabit
Ethernet, four USB 2.0 ports, two serial RS-232/422/485 channels and two serial
FAILING TO COMPLY WITH THESE BEST PRACTICES MAY DAMAGE THE PPM-C407
AND VOID YOUR WARRANTY.
Avoid Electrostatic Discharge (ESD)
Only handle the circuit board and other bare electronics when electrostatic discharge
(ESD) protection is in place. Having a wrist strap and a fully grounded workstation is
the minimum ESD protection required before the ESD seal on the product bag is
broken.
PRELIMINARY