PPM-C407/Configuration
v1.0
www.winsystems.com
Page 17
Layout and Pin Reference:
Additional Information
This power connection uses a 12-pin Samtec IPL1-106-01-L-D-RA-K, 2x6, 2.54 mm
pitch mini-mate locking header connector.
Matching connector:
•
Samtec IPD1-06-D-K housing
•
Samtec CC79L-2024-01L crimp pins
WinSystems cable CBL-PWR-700-18 simplifies this connection to the board.
7.8.2 J2 PC/104 bus (C/D, 16-bit ISA bus also includes J3) Connector
J3 PC/104 bus (A/B, 8-bit ISA bus) Connector
The PC/104 bus is electrically equivalent to the 16-bit ISA bus. Standard PC/104 I/O
cards can be populated on PPM-C407’s connectors, located at J2 and J3. The interface
does not support hot swap capability.
Pin
Name
Pin
Name
1
ATX_PWRGOOD
7
+5V_SB
2
GND
8
+5 V
3
GND
9
+5 V
4
+12VDC
10
-12 V
5
PSON_N
11
GND
6
PMC_RSTBTN_N
12
PWRBTN_N
6
1
7
12
PRELIMINARY
