PPC65B-1x/Setup and Installation
v1.0
www.winsystems.com
Page 10
Figure 7–3:
Remove rear cover
3. Insert Memory module into J3 at an angle, and then press down so the memory is
flat.
Figure 7–4:
Installing memory
4. Reinstall the rear cover.
7.3
Installing the Hard Drive (HDD/SDD)
To install a hard drive:
1. Remove power from the PPC65B-1x.
2. Remove the screw securing the HDD slot cover and remove the cover.
Figure 7–5:
Remove HDD cover
3. Remove the HDD tray (release the tray by pushing the lever to the left).
J3
