PPC65B-1x/Setup and Installation
v1.0
www.winsystems.com
Page 9
7.
Setup and Installation
Use the information in this section to setup and install the PPC65B-1x. Refer to
“Configuration” on page 22 to locate and identify the connectors outlined in this
section.
7.1
Installing the I/O Kit
To install the I/O kit:
1. Remove power from the PPC65B-1x.
2. Remove the screws securing the rear cover and remove the cover.
Figure 7–1:
Remove rear cover
3. Push the I/O daughter board into J11.
Figure 7–2:
Securing the daughter board
4. Secure I/O daughter board using the two captive knurled screws.
5. Reinstall the rear cover.
7.2
Installing Memory
To install memory:
1. Remove power from the PPC65B-1x.
2. Remove the screws securing the rear cover and remove the cover.
J11
