PCM-C418/Before You Begin
v1.0
www.winsystems.com
Page 5
1. Before You Begin
Review the warnings in this section and the best practice recommendations (see “Best
Practices” on page 48) when using and handling the WinSystems PCM-C418. Following
these recommendations provides an optimal user experience and prevents damage.
Read through this document and become familiar with the PCM-C418 before
proceeding.
1.1 Warnings
Only qualified personnel should configure and install the PCM-C418.
2. Introduction
This manual provides configuration and usage information for the PCM-C418 single
board computer. If you still have questions, contact Technical Support at (817)
274-7553, Monday through Friday, between 8 AM and 5 PM Central Standard Time
(CST).
Refer to the WinSystems website for other accessories (including cable drawings and
pinouts) that can be used with your PCM-C418.
3. Functionality
3.1 System
The PCM-C418 is a fan-less PC/104 single board computer (SBC) based on the low
power Vortex86DX3 processor. It requires approximately 7 Watts under full load while
operating over an extended temperature range of -40 to 85°C. The board has 2 GB
soldered-on LV DDR3 SDRAM, Ethernet, USB, serial and parallel I/O, DIO, PC/104, and
an optional external battery. The PCM-C418 provides an upgrade path for WinSystems'
FAILING TO COMPLY WITH THESE BEST PRACTICES MAY DAMAGE THE PCM-C418
AND VOID YOUR WARRANTY.
Please review the section “Best Practices” on page 48 and the other guidelines in this
manual carefully and follow them to ensure you are successfully using your embedded
PC.
This product ships with a heat sink. The product warranty is void if the heat sink is
removed from the product.
