Winnix Technologies co., Limited
10/12
Fourth: the fitting of HYR6021A Reader
1) 1 fitting modes of the reader
Picture 10 Fixing Instruction
There are two methods to fix the reader: “side installation as 1 font” and “L font installation”, see
the following picture. You can select the fixing mode according to your real demand. Generally
speaking, the side installation have a close identify range but easy for installation. The top installation
method has a long identify range but difficulty for installation.
Side Fixation Top Beam Fixation
Picture 11 the Fixation
2) The Fixation and Height Adjustment of the Reader
When frank fitting ,it demands that the crutch dia. of the reader 50 to 60mm while length2.2m Using
stain steel material that more than 1.3m thick is the best choice. Fix the reader to the top of the crutch
with the self-provided fastening pin in the casing of HYR6021A reader .Adjust the height from the
center of HYR6021A reader to the level of carriage way, according to the vehicle style(mainly indicates
the oversize vehicle and landaulet), generally about 2.0m(from 1.2m to 2.2m)
When crutch top fitting like the shape of letter L, it demands the dia. of L shape (or dragon-door shape)
crutch is from 60 to 80mm, while rail dia.60 to 60mm.It is best to sue stain steel material that more than
12 to 20mm thick. Fix the HYR6021A reader to the rail that near the middle carriage drive. The height
that the rail to the ground is needed to adjust from 3.5m to 4.0m, according to the height of vehicle
Install fixtures
HYR6021AReader
Fitting
Communication wire
