4-13
SECTION 4 –
APPLIANCES AND SYSTEMS
It is recommended to use mild soap and warm
water to clean the air filters. When finished,
allow filters to air dry.
NOTE: There are multiple Supply and Return
Vents throughout the coach. Therefore,
you must remember to remove each
separate air filter from each Return Air
Vent to clean.
WASHER/DRYER
–If Equipped
To Open the Door During a Wash Cycle
Follow these steps if you need to open the
door to your washer/dryer after a cycle has
already begun.
1. Advance the Program Selector to “Reset” and
wait 5 seconds.
2. Advance the Program Selector to “Drain” (8
o'clock) and allow the machine to drain
completely.
3. Advance the Program selector to “Reset” (the
“Status/Door Lock” LED will blink quickly to
indicate that the cycle has stopped, but the
door is STILL LOCKED).
4. When the “Status/Door Lock” LED blinks
SLOWLY (takes 1-2 minutes), you can open
the door.
To Open During a Dry Cycle
1. Advance the Program selector to “Reset” (the
“Status/Door Lock” LED will blink quickly to
indicate that the cycle has stopped, but the
door is STILL LOCKED).
2. When the “Status/Door Lock” LED blinks
SLOWLY (takes 1-2 minutes), you can open
the door.
IMPORTANT! Once a wash cycle is
underway, the washer/dryer door will LOCK for
the duration of the cycle and will STAY LOCKED
Return Air Vent
(Press tabs inward to remove air vent)
Air Filter
(Located on back side of Return Air Vent)
