10-3
SECTION 10 –
SLIDEOUT ROOMS AND LEVELING
Rear slideout switches (if equipped) are
located on the Switch Panel located in the
OnePlace cabinet.
The slideout room system uses 12-volt DC
motorized mechanisms with an electronic control
system to provide smooth operation and positive
weather seal.
NOTE: We recommend that you KEEP THE
ENGINE RUNNING WHILE
EXTENDING OR RETRACTING
SLIDEOUT ROOMS so the engine
alternator can provide maximum power
for proper operation of the slideout
mechanisms.
To Extend Slideout Room
Before Extending!
•
Level the coach and set the Parking Brake.
•
Release the travel lock or latch (if equipped)
inside the coach.
See information at beginning
of this section (if equipped).
•
Ensure exterior compartment doors are closed
so that they will not interfere with slideout
operation.
•
Check inside and outside the vehicle to make
sure that there are no people who could be
harmed or obstacles that could cause damage
due to room extension.
Front Slideout Switches
(Your coach may have one or more of these
switches depending on model, options, and
available equipment)
-Typical View
Rear Slideout Switch
(Your coach may have one or more of these
switches depending on model, options, and
available equipment)
-Typical View
The switch will illuminate blue when the
switch is on. White illumination indicates the
switch is off.
CAUTION
Never drive the vehicle with a slideout
room extended!
WARNING
CRUSH HAZARD. Keep people and
objects clear of the inside and outside of
the slideout room when operating. Failure
to comply could result in death or serious
injury.