![Winnebago 2015 Ellipse Operator'S Manual Download Page 112](http://html1.mh-extra.com/html/winnebago/2015-ellipse/2015-ellipse_operators-manual_987456112.webp)
SECTION 8 –
ENTERTAINMENT
8-4
•
Select “Sound Out”, then select “LG Sound
Sync (optical)”.
Listen to Music stored on a
Bluetooth device
•
Press the “Bluetooth” button on the front
panel of the Sound Bar or Bluetooth button on
Sound Bar remote to set Sound Bar to
Bluetooth mode.
•
On your Bluetooth device, perform the
pairing operation. A list of devices found will
appear on your device. Select “LG Sound
Bar”.
•
Enter the PIN code (if required).
•
When the devices are paired, the Sound Bar
Bluetooth LED will turn on for a few seconds
and turn off.
•
Turn the Sound Bar volume up or down.
Further Information
See the manufacturer’s user guide provided in
your InfoCase for complete feature descriptions
and operating instructions.
INFOTAINMENT CENTER
(HOUSE MODE)
–If Equipped
The Infotainment Center in your coach allows
you to view, listen, and control various modes
such as SiriusXM
®
satellite radio or Navigation
from the dash radio to all TV’s in your coach
while parked.
Basic Operating Instructions
•
Engage the parking brake.
•
On the Infotainment System, go to Main
Menu and select House Mode. This disables
the cab speakers and sends video and audio
source from the radio to AUX input (4) on the
HDMI matrix.
•
Use the dash radio remote control to operate
the dash radio from all the TV’s in your coach.
Further Information
See the manufacturer’s user guide provided in
your InfoCase for complete operating
instructions.
BLU-RAY
™
/DVD HOME
THEATER SYSTEM
–If Equipped
The Blu-ray
™
/DVD Home Theater System
operates from 120-volt AC household current
only, so you must have either the shoreline
connected, the generator running, or the inverter
turned on (if equipped).
To Watch a Blu-ray or DVD through
Home Theater
1. Turn “ON” the TV, HDMI Video Selection
System, and Home Theater System.
2. Determine which TV you want to use (e.g.
“Lounge” for lounge TV) and select Source
(1) for Blu-ray.
3. Set TV Input to HDMI1 by using the TV
remote or the Controls on the TV.
4. Set Home Theater System Source to Blu-ray
or DVD by using the front panel of the Home
Theater System or the Home Theater System
remote.