12-3
SECTION 12
FURNITURE & SOFTGOODS
14 - SLIDEO
UT R
OOM
12
- FURNITURE & SOFT
GOODS
3. Remove the table from the wall support
bracket by lifting the end of the table. Then
lower the table to rest on the cleats attached
to each dinette bench.
4. Arrange dinette cushions to cover bed area.
Bed to Dinette:
1. Replace the table onto the wall support and
lower the table leg.
2. Make sure that the table leg is secured into
the floor support bracket and the leg brace is
locked.
Sleep Number
®
Bed - Optional
by Select Comfort™
NOTE: The Sleep Number bed operates on 110-
volt AC household current only, so you
must have the shoreline plugged in or the
generator running to adjust the air pres-
sure settings in this bed.
NOTE: Before Traveling - If you plan to travel
with your Sleep Number mattress into
mountainous regions, either (1) tempo-
rarily disconnect the mattress from the
pump hose to allow air to escape or (2)
partially deflate the mattress chamber.
(Change Sleep Number settings to 20 or
lower on both sides before traveling.)
Rapid changes in altitude will affect the
air pressure inside the mattress. The
chamber may be damaged if the pressure
becomes too great.
Unlike innerspring mattresses, your Sleep
Number bed can be personalized specifically to
your ideal comfort level. The dual-chamber mat-
tress gives you the ability to enter a different
Sleep Number for each side of the bed. Since no
two body types are the same, each sleep partner
should personalize their side of the bed with
their own Sleep Number.
What is Your Sleep Number?
Your Sleep Number is a setting between zero
and 100 that represents the ideal combination of
mattress comfort, firmness, and support for your
body, giving you the best night’s sleep possible.
If you do not have your Sleep Number, this sec-
tion will take you through the process of finding
your Sleep Number and will provide you with
additional information about your Sleep Number
bed.
Using Your Sleep Number Remote
The buttons of the remote are contoured to be
easily distinquished even in the dark if neces-
sary. The ‘firmer’ button has a slight dome shape
and the ‘softer’ button is slightly dished.
