SECTION 12
FURNITURE & SOFTGOODS
12-2
is stored on top of the front section when not in
use. A bunk ladder (supplied) can be hooked into
the brackets on the rear edge of the mattress for
easier access and exit.
Couch Bed Conversion
Couch to Bed:
Pull the front edge of the couch seat upward
and outward from the wall while gently pushing
downward on the backrest until the cushions lie
flat. The bed is now ready for use.
Bed to Couch:
Push the front edge of the seat toward the wall
while lifting upward on the backrest until the
couch is fully seated against the wall.
Dinette/Bed Conversion
Dinette to Bed:
1. Lift the seats and remove the seat support
‘bumpers’ to allow the seats to lie flush for
use as a bed. Do not lose bumpers because
you must refit them when reverting back to
dinette seat configuration.
2. Release the catch on the table leg brace and
fold the leg up against the bottom of the
table.
Front Overhead Bunk
Shown with mattress sections in use position
Front Bunk Ladder
Shown hooked into mattress bracket