![background image](http://html1.mh-extra.com/html/winnebago/2005-minnie-winnie/2005-minnie-winnie_owners-manual_987439078.webp)
SECTION 11
ENTERTAINMENT
11-2
SWING OUT TV MOUNTS
VIDEO SELECTOR SYSTEM
The optional video selector system allows you
to switch the antenna, cable TV or DVD/VCR
signal to any TV set location in the coach.
This means one person can watch a ball game
coming in on the roof antenna on the bedroom
TV while another person watches a cable TV pro-
gram or a movie on the DVD on the front TV. Al-
so, two people can watch different programs on
the two TV’s while taping a third program on the
VCR.
Components
MAIN TV = (Front or Lounge TV)
VCR = VCR/DVD Combo Player
TV2 = Bedroom or Rear TV
TV ANT Power = TV Signal Amplifier
Signal Inputs:
AUX - Press to connect VCR or selected TV to
an electronic accessory component which
you may have installed later, such as a Digital
Video Disc (DVD) player.
SAT - Press to connect VCR or selected TV to
the Digital Satellite System (dish antenna).
ANT - Press to connect VCR or selected TV to
the roof antenna.
VCR - Press to connect selected TV to the VCR.
CABLE - Press to connect VCR or selected TV
to a cable TV system hookup.
Video Input Selection
To watch the VCR or DVD you must go to the
TV menu and select “Aux Input”. (It will not
work to simply select channel 3 or 4 on the TV.)
Refer to your TV operating guide for detailed in-
structions on selecting video aux input.
TV ANTENNA
The TV antenna on your motor home can be
easily raised, rotated a full 360
°
and lowered
from inside the vehicle by simply turning a crank
or rotating knob. A built-in signal amplifier de-
signed to strengthen signals, is controlled by a
power switch built into the TV jack assembly.
The signal amplifier is housed inside the an-
tenna with the circuit board connected directly to
the antenna elements. Power to operate the am-
plifier (12-volt DC) is supplied through the
downlead cable which also carries the TV signals
to the TV set. The power supply separates the 12-
volt DC from the TV signals and provides a place
for attaching the TV set and the 12-volt power
source.
Operation
Raising Antenna
- Turn elevating crank
clockwise in “UP” direction until some resis-
tance to turning is noted. Antenna is now in oper-
ating position. Turn amplifier power switch
“ON” to receive TV signal.
Swing-out TV mounts are not
intended for viewing while the vehi-
cle is in motion. If your model is
equipped with a swing-out TV
mount, the TV should be stowed and
latched while traveling.
CAUTION