![background image](http://html1.mh-extra.com/html/winnebago/2004-ultimate-freedom/2004-ultimate-freedom_owners-manual_987437051.webp)
2-29
SECTION 2
DRIVING YOUR MOTOR HOME
•
Do not open any of the four large T-handled
valves on the opposite end of the pump.
These regulate the coach leveling jacks
.
Step 2 - Crank Room Inward
•
A wheel (lug) nut wrench is used to crank the
room inward. You may use the wrench sup-
plied wth the coach (in one of the storage
compartments) or any type of lug wrench of
the same nut size.
•
Crank-in bolts are located on the outboard
mounting plates of the slideout room as
shown. These plates are located at both ends
of the room inside the StoreMore
TM
compart-
ment doors.
•
Loosen the stop bolt beneath the crank-in bolt
as shown before trying to turn the bolts.
•
After loosening the stop bolts, fit the lug
wrench socket onto the bolt head and begin
cranking clockwise slowly a few turns, then
alternate to the other side for a few turns. This
can be sped up by using a helper and an addi-
tional lug wrench to crank both sides evenly
together.
Use provided 1/4” nut driver to turn nut
counterclockwise 3 turns only.
Slideout Room Solenoid Valve
Crack-in Bolt
Stop Bolt