2-19
SECTION 2
DRIVING YOUR MOTOR HOME
CB RADIO WIRING
(Optional)
Your coach is pre-wired for CB radio installa-
tion. The wires are located beneath the dash to the
left of the steering wheel.
Look for a pair of wires, yellow (+) and white
(-), with connectors and flag labels, suspended
from the wiring harness.
Be sure to read the wire labels before install-
ing a CB radio. The labels contain important in-
formation and cautions.
SWR Adjustment
To adjust CB antenna SWR (standing wave
ratio), turn the adjusting rings of the antenna to
achieve the lowest SWR reading. This procedure
will help optimize transmitting and receiving ca-
pabilities of the radio system.
AUTOMATIC COACH
LEVELING SYSTEM
Your coach may be optionally equipped with
a 4-point HWH computerized, automatic, hy-
draulic leveling system.
This leveling system is designed to diminish
problems in selecting a parking site, making “set
up” easier and faster for you.
See the HWH Operator Manual in your
Owner’s InfoCase for complete operating in-
structions. It also contains additional precautions,
technical information, and instructions for manu-
al operation if automatic functions fail.
The leveling system control panel is located
on the driver’s side armrest panel.
TO
CB RADIO
TO
CB RADIO WIRING
LABEL
CB ANTENNA
CABLE
WIRE ASM-IP,MAIN
CB Radio Wiring
CB POWER PROVISION
RED + 12 V
BLACK GROUND
COAX ANTENNA
(SEE REVERSE ALSO)
CB POWER PROVISION
Purple
Green
Coax
+12 V
Ground
Antenna
(See Reverse Also)
CAUTION
The CB radio could become damaged
if CB antenna SWR is not adjusted
before operating CB radio.