![background image](http://html1.mh-extra.com/html/winnebago/2000-freedom/2000-freedom_operators-manual_987424099.webp)
8-15
SECTION 8
APPLIANCES & INTERIOR FEATURES
A/C Filter Size:
14” x 20” x 1”
NOTE: Do not block the filter in any way, such
as by setting packages or newspapers,
etc., on top of it. There must be free air
flow for the air conditioner to operate
efficiently.
Condenser Coils
The condenser is located in a compartment
on the left side of the coach. The condenser is
the large, black, rectangular area that looks like a
car radiator.
Periodically sweep debris carefully from the
fins of the condenser. Rinse dust off with clean
water. The condenser coils must be clean and
free of dust, debris and insect particles, etc., for
the air conditioner to cool efficiently.
Further Information
See the air conditioner manufacturer’s operat-
ing instructions supplied in your Owners Info-
Case. They contain detailed operating
instructions, special precautions and basic trou-
bleshooting.
TV ANTENNA
The TV antenna on your motor home can be
easily raised, rotated a full 360
°
and lowered
from inside the vehicle by simply turning a crank
or rotating knob. A built-in signal amplifier de-
signed to strengthen signals, is controlled by a
power switch built into the TV jack assembly.
The signal amplifier is housed inside the an-
tenna with the circuit board connected directly to
the antenna elements. Power to operate the am-
plifier (12-volt DC) is supplied through the
downlead cable which also carries the TV signals
to the TV set. The power supply separates the 12-
volt DC from the TV signals and provides a place
for attaching the TV set and the 12-volt power
source.
Operation
Raising Antenna
- Turn elevating crank
clockwise in “UP” direction about 13 turns or
until some resistance to turning is noted. Antenna
is now in operating position. Turn amplifier pow-
er switch “ON” to receive TV signal.
Rotating Antenna
- Make sure antenna is in
the “UP” position. Pull down on rotating knob
until it disengages ceiling plate and rotate for best
picture and sound on TV set.
Lowering Antenna to Travel Position
-
Rotate antenna until pointer on rotating knob
aligns with pointer on ceiling plate.
WARNING
Never allow the antenna to touch
electrical power lines or any other
electrical wires.
CAUTION
Never leave the antenna partially
raised or partially lowered. This can
damage the crank mechanism gears.
Always raise the antenna straight up
or lower it completely into the travel
position.