6
- Check that the bed operates properly after installing it in accordance with the check-list
appended in this document. (Test all of its functions)
- The patient is a planned operator of the bed. Users must be trained in how to use the
equipment.
- Inform the patient and his visitors of the safety instructions to be observed.
Only use original parts and accessories supplied by WINNCARE to guarantee safety and maintain product
conformity. The bed must not be modified.
Abnormal use of the bed may damage it or cause accidents to users, in which case the warranty shall be
annulled. Abnormal use means failure to comply with the precautions for use, maintenance instructions and
other uses not related to the bed’s normal purpose, such as: use of the bed by several people at the same time
(except DUO DIVISYS bed), use outdoors, moving the bed on a slope that is steeper than 10°, etc.
Put the bed in the designated room, foreseeing an appropriate perimeter of use for the different functions
(variable height, TR, etc.), especially if the bed has a lifting pole or side rails. Check that there is sufficient
ceiling height if a lifting pole is fitted.
Brake the wheels.
The mains socket should remain accessible to enable the bed to be disconnected quickly.
Plug in the power lead, checking that the mains comply with the standards in force and that it is suitable for the
supply box voltage.
Also ensure that the power lead, the remote control lead as well as the cables of possible other devices are
positioned correctly to prevent any risks of getting caught between the moving parts of the bed.
3.2. Electrical characteristics
3.2.1. Electrical data
Classe II (double
insulation)
Frequency
Protection level against
dust and liquid penetration
Operating time
In accordance with DEEE
Bed code
Voltage
Current type
XXX-XXX-XXX
IP XX
xxxV ~ xxH
Z
FACTEUR DE SERVICE :
xx% max. x min/xx min
PUISSANCE ABSORBEE :
Xxx VA
ET-xxxxx
Protection level against
electric shocks (type BF)
Absorbed power
Sticker code
