20
8. OPERATION OF THE SLEEPING SURFACE
8.1. Back rest
8.1.1. Standard back rest
In the event of a power cut or failure, flatten the back rest as follows :
a) Disconnect the power supply.
b) Dismantle the headboard
.
c) Stand at the head of the bed and take hold of the back rest handle
with one hand. Push or lift to
compensate the pressure exerted by the patient and unhook the clip
by the connecting rod with the
other hand. The back rest jack will then pivot downwards.
d) Put the headboard back.
Version with handle on the back rest
Version without handle on the back rest
8.1.2. Back rest with translation
Same operation for flattening as the standard back rest.
The back rest with translation avoids to slip forward..
1
1
2
2
3
3
10 cm
