11
A detailed examination must be carried out on the side rails at least once a year on such parts as : cross-beam
guides, cross-beams and unlocking fingers.
5.3. Cleaning
High pressure cleaning, machine cleaning, washing tunnel or jet cleaning is prohibited.
Clean the structure with soapy water and a soft cloth then rinse and wipe dry. All aggressive or scouring
products such as detergents, powders, solvents and bleach are prohibited.
5.4. Disinfection
Isolate the side rails in a disinfection room equipped with a particle filtering system and disposal for washing
the floors and walls after disinfection.
Use a disinfectant with bactericidal, fungicidal and virucidal properties, either by spraying it evenly onto
surfaces, applying it with a disposable cloth or spraying a disinfectant aerosol from a distance of 30 cm.
NB:
Comply with the precautions for using disinfectants indicated on these products.
Leavy to dry and protect the disinfected equipment from other equipment that has not been disinfected by a
film and a label indicating the disinfection date.
5.5. Lifetime
The lifetime under normal conditions of use and maintenance is 5 years for accessories, especially for wooden
side rails.
5.6. Warranties
➢
All of our products carry a warranty against any manufacturing defect, provided the normal conditions
for use and maintenance are complied with.
➢
Labour costs due to changes in structures or parts under warranty are not taken into account.
➢
Please refer to the standard terms of sale for the specific terms of warranty for each product.
➢
Every time you contact us for possible maintenance, you must quote us the information on the
identification label located under the cross-beam.
➢
Original parts shall be supplied for replacement, within the term of warranty, by our customer sales
network determining the beginning of the term of warranty.
➢
Defective parts must be returned to ensure proper application of this warranty and also to avoid any
invoicing.
6. CONDITIONS FOR SCRAPPING
➢
The product must be scrapped if the main requirements are no longer met, particularly when the product
no longer has its original characteristics and has not been subject to corrective action during the manufacturing
process.
➢
Measures should therefore be taken to ensure that the product is no longer used for the purpose it was
originally intended.
➢
When scrapping, the current environmental standards must be complied with.
Summary of Contents for A579-00
Page 7: ...7 6 8 7 9 10...
Page 12: ...12...
