Winmate S430M4 Series PDA
User Guide
Chapter 1: Safety Information
Exposure to Radio Use
S430 series is equipped with Bluetooth, WI
or area, user may be required to turn off the radios. For example;
•
User’s needs to turn the phone OFF when in an area posted “TURN OFF RADIO
SIGNAL.” to avoid interfering with blasting operations.
•
User needs to turn OFF the radio signal in health care facilities. Hospitals or health
care facilities may be using devices that sensitive to Radio Frequency energy.
•
Aviation authority regulations pro
In order to prevent the handheld from emitting radio signals, do the following step:
•
To turn off the device:
Press and hold the power button to display the
tap the
Power Off
•
To set the device into airplane mode:
Press and hold the power button to display the
tap
Airplane mode
•
To turn off the Communication options e.g. Bluetooth, Wi
Select
MENU
, tap
Setting
If any radios are on, tap
RF Exposure Information
This PDA meets the government’s requirement for exposure to radio waves. This PDA is
designed and manufactured not to ex
frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government. The exposure standard for wireless devices employs a unit of measurement
known as the Specific Absorption Rate (SAR).
Test for SAR are conducted using standard operating positions accepted by the FCC with
the device transmitting at its highest certified power level in all tested frequency bands.
Although SAR is determined at the hi
device while operating can be well below the maximum value. This is because the PDA is
designed to operate at multiple power levels so as to use only the poser required to reach
the network. In general, the closer user to a wireless base station antenna, the lower the
power output.
For body worn operation, this PDA has been tested and meets the FCC RF exposure
guidelines for use with an accessory that contains no metal and the positions of the handset
Chapter 1: Safety Information
series is equipped with Bluetooth, WI-Fi and Cellular modem radio. In some situation
or area, user may be required to turn off the radios. For example;
User’s needs to turn the phone OFF when in an area posted “TURN OFF RADIO
SIGNAL.” to avoid interfering with blasting operations.
User needs to turn OFF the radio signal in health care facilities. Hospitals or health
care facilities may be using devices that sensitive to Radio Frequency energy.
Aviation authority regulations prohibit user from using phone while in the aircraft.
In order to prevent the handheld from emitting radio signals, do the following step:
Press and hold the power button to display the
Phone Options
menu for 3 sec then
To set the device into airplane mode:
Press and hold the power button to display the
Phone Options
menu for 3 sec then
To turn off the Communication options e.g. Bluetooth, Wi-Fi, cellular modem radio:
Setting
, and then tap
Wireless & networks
.
tap them to uncheck all the radios’ checkboxes in the devices
RF Exposure Information
This PDA meets the government’s requirement for exposure to radio waves. This PDA is
designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government. The exposure standard for wireless devices employs a unit of measurement
known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6W/Kg.
Test for SAR are conducted using standard operating positions accepted by the FCC with
the device transmitting at its highest certified power level in all tested frequency bands.
Although SAR is determined at the highest certified power level, the actual SAR level of the
device while operating can be well below the maximum value. This is because the PDA is
designed to operate at multiple power levels so as to use only the poser required to reach
al, the closer user to a wireless base station antenna, the lower the
For body worn operation, this PDA has been tested and meets the FCC RF exposure
guidelines for use with an accessory that contains no metal and the positions of the handset
3
Fi and Cellular modem radio. In some situation
User’s needs to turn the phone OFF when in an area posted “TURN OFF RADIO
User needs to turn OFF the radio signal in health care facilities. Hospitals or health
care facilities may be using devices that sensitive to Radio Frequency energy.
hibit user from using phone while in the aircraft.
In order to prevent the handheld from emitting radio signals, do the following step:
menu for 3 sec then
menu for 3 sec then
Fi, cellular modem radio:
them to uncheck all the radios’ checkboxes in the devices
This PDA meets the government’s requirement for exposure to radio waves. This PDA is
ceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government. The exposure standard for wireless devices employs a unit of measurement
The SAR limit set by the FCC is 1.6W/Kg.
Test for SAR are conducted using standard operating positions accepted by the FCC with
the device transmitting at its highest certified power level in all tested frequency bands.
ghest certified power level, the actual SAR level of the
device while operating can be well below the maximum value. This is because the PDA is
designed to operate at multiple power levels so as to use only the poser required to reach
al, the closer user to a wireless base station antenna, the lower the
For body worn operation, this PDA has been tested and meets the FCC RF exposure
guidelines for use with an accessory that contains no metal and the positions of the handset