User Manual
Chapter 6
Mounting
- 81 -
6.3 Mounting Guide
The IP69K Stainless P-Cap Panel PC comes with different mounting options suitable for
most of the industrial applications. The main mounting approach is chassis - very user-
friendly in terms of installation. Refer to sub-sections below for more details.
6.3.1 VESA Mount
Flat Stainless P-CAP Panel PC has VESA mount holes on the rear side. Follow
instructions below to mount the unit with VESA Mount bracket (not supplied by
Winmate).
Size
VESA Plate Dimensions
Screw hole diameter
15”,19”
100 x 100 mm
VESA M4x5 mm
21.5”
100 x 200 mm
VESA M4x5 mm
Mounting Instruction:
1.
Screw VESA bracket to the fixture (ex. swing arm) with four VESA screws.
2.
Place the device on VESA bracket.
NOTE:
Notice that both hooks on bracket should lock the notches on the
back cover of the device.
