23
Chapter 4: Operating the Device
4.4 Built-in Devices On/Off
This section describes how to get a quick access to set-up built-in devices, including turning on/off RF
modules, setting up barcode reader, RFID reader, and expansion modules.
4.4.1 Using the Wireless LAN (Wi-Fi)
To use the wireless LAN (Wi-Fi) feature to connect to the network, perform the following procedure:
1. Open the Hottab utility by press the
(Menu) Button located on the front panel, OR launching the
Hottab Utility application.
2. Tap on the
Device ON/OFF
button.
3. Check the status color of the
Wi-Fi
icon:
Item
Status Color
Description
Wi-Fi
Orange
Wi-Fi is enabled.
White
Wi-Fi is disabled.
4. If the Wi-Fi feature is disabled (white), tap on the Wi-Fi icon to enable it (orange).
5. Click the wireless network connection status icon in the Windows notification area. A list of available
wireless networks is displayed.
6. Double-click a network to connect to it. Provide required authentication information if needed.
7. To check the connection status, observe wireless network connection status icon in the Windows
notification area. The more bars the icon shows, the better the wireless LAN connection strength is.
8. Now wireless LAN connection is setup, try connection to the network with a internet browser such
as Internet Explorer.