14
Rugged Windows Tablet M101P
2.5.1 Installing SIM Card (For 3G/LTE Equipped Devices)
The Tablet Computer supports 3G/LTE data connection and fits a Micro-SIM card.
To install the SIM card:
Tools Needed:
Service Windows
Screw: M2x5, 4 pc
Screwdriver: Philips Type , Size #0 , for
M2 screws, torque: 2.0 ± 0.5 kgf.cm
3G/ LTE Module
Screw: M2x3.5, 1 pc
Screwdriver: Philips Type , Size #0 , for
M2 screws, torque: 2.0 ± 0.5 kgf.cm
❶
Remove four screws and remove the service
window.
❷
Remove the one screw that secures the 3G/ LTE
module. Carefully lift the module up.
Do not to damage
the connected cables!
❸
Carefully flip and move the 3G/ LTE module and
to the right.
Do not disconnect cables!
❹
Insert SIM-Card all the way in.
Chip/ contact facing
down.
❺
Use your hand to carefully pull the cable outside
the module card.
Re-insert the 3G/LTE module and
fasten one screw.
Accurately route the cables.
Do
not bend cables! Do not pinch/ squeeze the cable!
❻
Re-insert the service window and fasten with the four
screws.
Caution
When re-inserting 3G/LTE module, please pay attention to cable routing. Make sure the
cable module does not get squeezed.