Winmate IK32, User Manual

Page: 48 / 84

USER MANUAL CHAPTER 3 INSYDE H20 BIOS SETUP
- 48 -
BIOS Setting Description Setting Option Effect
Boot
Performance
Mode
Configure Boot
Performance Mode
parameters
-Max non-turbo
performance
-Max battery
-Turbo
Performance
Select the performance
state that the BIOS will
set starting from reset
vector
Intel
SpeedStep (ta)
Configure Intel
SpeedStep (ta)
parameters
Enabled/
Disabled
Allows more than two
frequency ranges to be
supported
Intel Speed
Shift
Technology
Configure Intel Speed
Shift Technology
parameters
Enabled/
Disabled
Enable/ Disable Intel
Speed Shift Technology
support. Enabling will
expose the CPP v2
interface to allow for
hardware controlled
P-states
-Turbo Mode Enable or disable
Turbo Mode
Enabled/
Disabled
Enable/ Disable
processor Turbo Mode
(requires EMTTM
enabled too). Auto means
enabled, unless max
turbo ratio is bigger than
16
– SKL AO W/A
C states Enable or disable
C states
Enabled/
Disabled
Enable/ Disable CPU
Power Management.
Allows COU to go to C
states when it is not
100% utilized
Custom
P-state Table
Configure Custom
P-state Table
parameters
Enter Enters sub-menu
-Number of
P-states
Select the number of
custom P-states.
[Number] Set the number of custom
P-states. At least 2 states
must be present