Winmate IK32, User Manual

Page: 30 / 84

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION
- 30 -
2.4.4 JP4: VR/Chipset Control Selector
2.4.5 SW1: Clear CMOS
Please follow the instructions below to change CMOS settings. Remember to set
jumper back to Normal before turning on the power supply.
CAUTION
TURN OFF the power supply before setting Clear CMOS.
Step 1
: To set the jumper to “clear” position, switch 1 to 0, 2 to N.
Step 2:
To set the jumper to “normal” position, switch 0 to 1, N to 2.
Setting Function
1-3 (Default)
VR Control
2-4 (Default)
3-5
Chipset
4-6