User Manual
Chapter 3
Mounting Solutions
G-WIN Vehicle Mount Panel PC
35
Chapter 3: Mounting Solutions
This chapter provides mounting guide for all available mounting options. Pay attention
to cautions and warning to avoid any damages.
WARNING! / AVERTISSEMENT!
Follow mounting instructions and use recommended mounting
hardware to avoid the risk of injury.
Suivez les instructions de montage et d'utilisation recommandé le
matériel de montage pour éviter le risque de blessure.
3.1 Cable Mounting Considerations
For a nice look and safe installation, make sure cables are neatly hidden behind the
Panel PC. Refer to
for the cable installation instruction.
WARNING! / AVERTISSEMENT!
Observe all local installation requirements for connection cable type
and protection level.
Suivre tous les règlements locaux d’installations, de câblage et niveaux
de protection.
WARNING! / AVERTISSEMENT!
Turn off the device and disconnect other peripherals before
installation.
Éteindre l’appareil et débrancher tous les périphériques avant
l’installation.
3.2 Safety Precautions
Observe the following common safety precautions before installing the equipment:
•
Use separate, non-intersecting paths to route power and networking wires. If
power wiring and device wiring paths must be crossed make sure the wires are
perpendicular at the intersection point.
•
Keep the wires separated according to the interface. Do not bundle input wiring
with output wiring. Keep them separate.
•
When necessary, it is strongly advised to label wiring to all devices in the system.
ALTERNATING CURRENT /
MISE À LE TERRE!
To prevent electrical shock, the Safety Ground location on the rear
must be bonded to the local earth ground through a minimum 12 AWG
wire as short as possible
Pour éviter les chocs électriques, l’emplacement de la prise terre à
l’arrière doit être lié à terre locale, à travers un 12 AWG minimum et
aussi court que possible.
