manualshive.com logo in svg

Winmate FA33, Manual

Share
Download
Winmate FA33 Manual Download Page 47

3 - 17

BIOS Setup

LPT & COM

LPT/COM

 enables the power management timers when a no activity event

is detected in the LPT and COM ports. 

LPT (COM)

 enables the power

management timers when a no activity event is detected in the LPT (COM)

ports. 

NONE

 to disable the PM timer even if a no activity event is detected.

The options are: LPT/COM, LPT, COM, NONE.

HDD & FDD

ON

 will enable the power management timers when no activity event is

detected in the hard drive and floppy drive. 

OFF

 disables the PM timer

even if no activity event is detected. The options are: OFF, ON.

PCI Master

To set this feature at ON activates that Power Management feautre (PM)

wake-up event for the PCI bus master card.

The options are: OFF, ON.

PowerOn by PCI Card

When set at Enabled, any PCI-PM event awakes the system from a PCI-

PM controlled state.

The options are Disabled or Enabled.

Power On By Modem/Lan

When set at Enabled, an input signal comes from modem or from the other

client/server on the LAN awakes the system from a soft off state if con-

nected over LAN. The options are Disabled or Enabled.

Power On By Alarm

Enabled 

allows you to set the time the system will be turned on from the

system power-off status. The options are: Enabled, Disabled.

Date (of Month)

This feature allows you to set the day of the alarm starts when the RTC

Alarm Resume From Soft Off is set to be Enabled. The options are: 0, 1..31.

Resume Timer  (hh:mm:ss)

If an ATX power supply is installed and when RTC Alarm Resume is En-

abled, this feature allows you to set the time of the alarm starts when the

RTC Alarm Resume From Soft Off is set to be Enabled.

The options are: 7: 0: 0 (Default).  hh (

hour

) - 0, 1, 2,.., 23; mm (

minute

) - 0,

1, 2,..,59; ss (

second

) - 0, 1, 2,..,59.

Summary of Contents for FA33























































Reviews:

No comments

Brands by name

Popular brands

Load more brands