manualshive.com logo in svg

Winmate FA33, Manual

Share
Download
Winmate FA33 Manual Download Page 37

3 - 7

BIOS Setup

Memory Hole

When you install a Legacy ISA card, this feature allows you to select the

memory hole’s address range of the ISA cycle when the processor ac-

cesses the selected address area. Please read your card manual for detail

information. When disabled, the memory hole at the 14MB (or 15MB)

address will be treated as a DRAM cycle when the processor accesses the

14~16MB (or 15~16MB) address area.

The options are: 15M - 16M, Disabled.

P2C/C2P Concurrency

This feature allows users to set PCI/AGP Master-to-CPU/ CPU-to-PCI/

AGP Slave concurrent. The options are: Enabled, Disabled.

System BIOS Cacheable

When enabled, allows the ROM area F000H-FFFFH to be cacheable when

cache controller is activated. The options are: Enabled, Disabled.

Video RAM Cacheable

When enabled, allows the system to use the video RAM from cache RAM,

instead of the slower DRAMs or ROMs.

The options are: Enabled, Disabled.

AGP-4X Mode

This feature allows user to select the AGP mode be to 2x or 4x when an

AGP add-in card installed. However, when set at Enabled and the AGP

card only support 1x mode, the system will fall back 1x mode automatically.

The options are: Enabled, Disabled.

AGP Driving Control / AGP Driving Value

These two features allow user to improve the performance of AGP card

manually by pressing Page Down/Page UP key if necessary.

The options of AGP Driving Control are: Auto, Manual.

AGP Aperture Size

It allows you to select the main memory frame size for AGP use.

The options are 4M, 8M, 16M, 32M, 64M, 128M.

Summary of Contents for FA33























































Reviews:

No comments

Brands by name

Popular brands

Load more brands