Winmate FA33, Manual

Page: 16 / 54

2 - 6
FA33 Mainboard Manual
Clear CMOS Data: JP1
To clear the contents of the CMOS, please follows the steps below:
(1). Turn off the power supply of the computer system. (2). Place the jumper
cap on the pin pair 2-3 for 5 seconds, then put the cap back to the pin pair 1-2.
(3). Turn on the power of the system. (4). Enter BIOS CMOS Setup Utility and
Select Load Setup Defaults. Type Y and press Enter key. (5). Set the system
configuration in the Standard CMOS Setup menu.
CPU/Bus Ratio Select: JP2
This feature allows users to select a CPU at a higher frequency clock ratio than
that specification allows. It may or may not run at this ratio, depending on the
quality of the processor and the extent to which the ratio has been overset;
howerever, this option will not work with those frequency-locked CPUs .