Winmate EAC Mini IL20EAC-N, User Manual

Page: 44 / 82

USER MANUAL CHAPTER 4 INSYDE UEFI BIOS SETUP
- 42 -
BIOS Setting Description Setting Option Effect
Chipset-SATA
Controller
Configuration
The Chipset SATA
controller supports the
2 black Internal SATA
ports (up to 3 GBb/s
supported per port)
Enadbled/
Disabled
Enables/ Disables
the Chipset-SATA
Controller
SATA Mode
Selection Determines how SATA
controller(s) operate
AHCI Select SATA Mode
SATA Interface
Speed
Select SATA interface
speed, CHV A1 always
with Gen1 selected
Gen1/ Gen2/
Gen3 Select SATA
Interface Speed
Port 0
Enadble or Disable
SATA Port Enadbled/
Disabled Enadble/ Disable
SATA Port
SATA Port 0 Hot
Plug Capability
Enadble or Disable
SATA Port 0 Hot Plug
Capability
Enadbled/
Disabled
If enabled, SATA port
will be reported as
Hot Plug capable.
Spin Up Device
Configure Spin Up
Device settings Enadbled/
Disabled
If enabled for any of
ports Staggerred
Spin Up will be
performed and only
the drives which
have this option
enabled will spin up
at boot. Otherwise all
drives spen up at
boot.
SATA Device
Type
Identify the SATA port
is connected to Hard
Disk Drive or Solid
State Drive
Hard Disk
Drive/ Solid
State Drive SATA Device
connected to HDD or
SSD
SATA Port 0
DevSlp Configure SATA Port 0
DevSlp settings Enadbled/
Disabled
Enadble/ Disable
SATA Port 0 DevSlp.
*Board rework for LP
needed before enable
DITO
Configuration Configure DITO
settings Enadbled/
Disabled Enadble/ Disable
DITO Configuration