- 1 -
Temperature and Humidity Control WM-CONTROL-SS
15S-601 is microprocessor-based controller to be connected to the 15S-602
keypad by means of a two-wire cable at a distance of up to 100 ft. It is provided
with four relay outputs to control liquid line solenoid valve, evaporator fan
(adjusting humidity), and alarm auto-dialer and cellar heater. It is also provided
with up to 4 NTC or PTC probe inputs for cellar temperature and evaporator
temperature control, bottle temperature and condenser temperature monitor. The
controller is fully configurable through special parameters that can be easily
programmed through the keypad. The controller can be connected to internet
based 15S-WEB module through external module 15S-CX. The keypad is thin and
has a stainless steel face which can be perfectly integrated into a wall.
1. Keypad and Controller
1) How to use keypad
SET
:
To display set-point; in programming mode it selects a parameter or confirms
an operation.
:
To start a manual defrost.
:
To see the maximum stored temperature; in programming mode it browses
parameters or increases displayed values.
:
To see the minimum stored temperature; in programming mode it browses
parameters or decreases displayed value.
:
To turn on or off the power to the unit.
+
:
To lock or unlock the keypad.
SET
+
:
To enter in the programming mode.
SET
+
:
To return to the
temperature display.
