Mount the probe to
ensure these two metallic
contacts are near the
surface to be monitored,
but not touching the
surface
To insure proper operation, test weekly.
Concrete can be semi-conductive.
If experiencing false alarms, insulate all
probes mounted on concrete.
Features
• Water Detection when liquid makes contact with probe
• Contacts above floor level to prevent false floor condensation detection
• Checks for water constantly, requires two positive checks for a valid alarm
Programming
1. Enable Programming Mode
2. Open and close the case to “tamper” the device
3. Customize name and settings as desired and touch “ADD”
Probe
O
ne
Y
ear
L
imited
W
arrantY
Winland Electronics, Inc. (“Winland”) warrants to the end user/purchaser that each product of its manufacture shall be free from defects
in material and factory workmanship for a period of one year from the date of purchase, when properly installed and operated under
normal conditions according to Winland’s instruction. Winland’s obligation under this warranty is limited to correcting, without charge,
at its factory any part or parts thereof which shall be returned to the factory, by the original purchaser, transportation charges prepaid,
within one year of the date of purchase and which upon examination, shall disclose to Winland’s satisfaction to have been originally
defective. Correction of such defects by repair to, or supplying replacements for, defective parts shall constitute fulfillment of all Winland’s
obligations to purchaser under this limited warranty. Repair service performed by Winland after one year from date of purchase will be
for a reasonable service charge. This limited warranty shall not apply to any of Winland’s products which have been subject to misuse,
negligence or accident or which have been repaired or altered outside of Winland’s factory. The warranty is void if the Product’s housing
or cover is removed.
Winland shall not be liable for loss, damage or expense resulting, directly or indirectly, from the use of its products or any other cause.
This warranty shall be null and void in its entirety if: (i) the product is altered or modified in any way that is not consistent with the
manufacturer’s instructions, or (ii) the product is used with or connected to a device: (a) that such product is not intended to be used with
or connected to, (b) is not otherwise consistent with the manufacturer’s instructions, or (c) is not otherwise approved by the manufacturer.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSES, NON-INFRINGEMENT AND TITLE, AND ANY WARRANTIES ARISING FROM COURSE
OF DEALING, USAGE OF TRADE OR OTHERWISE. ALL OTHER REPRESENTATIONS MADE TO THE END USER/PURCHASER BY ANY OTHER PARTY
ARE ALSO EXCLUDED. WINLAND SHALL NOT BE LIABLE TO ANY PERSON FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY DESCRIPTION, WHETHER ARISING OUT OF WARRANTY OR OTHER CONTRACT, NEGLIGENCE OR OTHER TORT, OR OTHERWISE. Under
no circumstances shall Winland’s liability under this limited warranty exceed the purchase price paid by the end user/purchaser for the
product. No person, agent or dealer is authorized to give warranties on behalf of Winland nor to assume for Winland any other liability in
connection with any of its products.
S
pecificationS
Power Requirement Batteries: 2 - CR2032 Approximate Battery Life: 5 years
Replace Batteries: (2) Panasonic CRT2032, Energizer CR2032, or Duracell DL2032
Wireless Signal Range 600 ft (200M), open air
Code Outputs
tamper, tamper restore, alarm, alarm restore, low battery
Transmitter frequency 319.5 MHz and 345MHz
Unique Code ID
Supervisory keep-alive interval
70 minutes
RF Peak field strength
Typical 36000 uV/m at 3m
Operating Temperature 32° to 122°F (0° to 50°C)
Storage Temperature
-40° to 140°F (-40° to 60°C)
Max Cable Length
72”
Package Weight
.158 lbs
Transmitter Dimensions 2.71” H x .95” W x .56” D
Probe Dimensions
.7” W x 1.77” L x .38” D
Mounting Probe
Can be mounted to wall surfaces using the provided
mounting screws or adhesive tape provided
Case Material
ABS
Warranty
1 Year Limited
Test Procedures
To test the WBTX operational status, form a water bridge between the two
metallic contact points (See figure 3) with a moistened finger or cloth. If work-
ing properly, the WBTX will activate the warning device to which it is connected
within approximately three seconds. The WBTX will reset automatically when
the probe dries and there is no longer a water bridge between the two metallic
contact points.
1950 Excel Drive, Mankato, MN 56001 • 800-635-4269 • www.winland.com
© 2017 Winland Electronics, Inc.
D-001-0174
Cover Latch
Tamper Switch
Battery
