Winget CUMFLOW RP150XD MK2, Parts & Operation Manual

Page: 4 / 87

SECTION 6 ELECTRICAL SYSTEM
6.1 Electrical Instructions
6.2 Wiring Diagrams
SECTION 7 MISCELLEANEOUS
7.1 Noise Details
The contents of this handbook although correct at the time of publication, may be subject to
alteration by the manufacturers without notice and Winget Limited can accept no responsibility for
any errors or omissions contained within the following pages. Nor can we accept any liability
whatsoever arising from the use of this manual howsoever caused.
Winget Limited operate a policy of continuous product development. Therefore, some illustrations
or text within this publication may differ from your machine
Winget Limited can accept no responsibility for incorrectly supplied parts unless the machine serial
number, part number and a full description of the items required is given when the order is placed.
NOTE
Imperial fixings (bolts, setscrews, nuts, washers etc) have been progressively changed to Metric. If
in doubt as to whether you have a Metric or Imperial fixing please order the metric items listed, i.e.
bolt or setscrew and associated or flat and spring washers to replace the existing items
NOTE
Electrical cables particularly those with copper conductors suffer from a condition known as
‘relaxation’ which may cause wiring to work loose over a period of time, it is recommended
that the tightness of wiring connections and terminals are checked following the first month
in service.