Winget CUMFLOW RP150XD MK2, Parts & Operation Manual

Page: 28 / 87

MAINTENANCE AND LUBRICATION
NOTE:
ALWAYS ENSURE APPARATUS IS ISOLATED FROM MAINS SUPPLY BEFORE
COMMENCING MAINTENANCE. IF NECESSARY A ‘PERMIT TO WORK’ SHOULD
BE OBTAINED
DAILY:
Charge the grease points using Total EP2 Grease 2 (or equivalent)
WEEKLY
Lubricate
Racks Apply Open Gear Lubricant (or equivalent)
Pinions Apply Open Gear Lubricant ( or equivalent)
Inspect and top-up if necessary.
1. Star Gear Box (BH302) Use Total Carter SP220 1.8 litres cap
2. Pan Drive Gear Box (BH202) Use Total Carter SP220 1.2 litres cap
(Refer to plate on top of Gearbox to cross check oil type and capacity)
NOTE:- Total Carter SP220 is a synthetic oil and should not be mixed with mineral oils such as
Mobil Mobilgear 630, unless the gearbox is thoroughly flushed out after draining.
INSPECT AND ADJUST-MONTHLY
1. Pan Gear and Pinion, grease Open Gear Lubricant (or equivalent), as required.
2. Adjust Star Blades, Fixed Blades and Discharge Blade to the following settings, also
make sure that Blade Fingers are free in their bearings and that the springs are clear of
obstruction.
3. Star Drive Bevel Pinions, remove cover and grease pinions with Open Gear Lubricant or
equivalent as required. Check retaining grub screws and keys are tight.
MIXING BLADE 3mm clear of pan base. Adjust by moving the blade up or down its
finger.