WZDS9100 #2
10
Mounting Plate for 9100 Evaporators
The holes shown are the best locations to route the refrigerant lines, condensate drain, and electric. For installations
where the line set will be accessible on the backside of the wall, use the alternate route. When that is not possible,
and the line set will be run inside the wall before the drywall is installed, use the suggested route. This will leave the
flare connections exposed so they can be connected after the walls are finished.
Use caution when using the alternate route. Secure the piping above the bend before turning the piping to
prevent kinking the suction line.
A
qualified service technician
must record all of the information on the diagnostic sheet
before
calling for
technical assistance. The technician
must
be able to identify the unit with the order number and serial numbers to
receive accurate trouble shooting assistance. All recommendations for repair or adjustment will be based on the
information provided by the
service
technician
. Any incorrect recommendations based on incorrect or insufficient
data are not covered by the warranty.
