background image

 

TYPICAL INSTALLATION 

FROM

SAT

FROM

CABLE

TO 

SECOND TV

TO 

SECOND TV

SATELLITE 
RECEIVER

FROM

CABLE TV

CHANNEL

DVD

3  4

VIDEO 

OUTPUT

OUT

IN

VIDEO

RT

LF

FROM

VCR

FROM

ANT

VCR
/TV3

TO

MAIN TV

12V DC

100 mA

+12V DC
POWER

SOURCE

CHANNEL

3 OR 4 SELECTOR

VIDEO

IN

AUDIO R

IN

AUDIO L

IN

TV SET

MAIN TV

AMP

VCR/TV3

RF IN

AUDIO L 

OUTPUT

AUDIO R 
OUTPUT

DVD

 

 

 

 

INSTALLING COAX CONNECTORS 

 

1. 

Strip outer cover back ½” from end of cable. Fray braid back as far as outer cover will allow. 

2. 

Trim braid close to outer cover and remove ¼” of inner insulation. 

Be careful not to nick center conductor and make 

sure no foil or braid can touch center conductor.

 

3. 

Slide connector tip between braid and inner insulation (braid and foil, on foil shield cable), and push connector on cable as 
far as it will go. Crimp built-in ferrule with appropriate crimping tool. 

Do not crush cable out-of-round.

 (If you are 

installing in very hot weather, increase these dimensions 1/8”). 

 

 

WINEGARD LIMITED 90 DAY WARRANTY 

 

   Winegard Company warrants this product only against defects in materials or workmanship for a period of ninety (90) days from the date of original 
purchase. Customer may ship the product prepaid to Winegard Technical Services (located at 3000 Kirkwood Street, Burlington, Iowa 52601, 
Telephone 800-788-4417). Do not return product to place of purchase. Customer must return the product along with a brief description of the problem 
and provide Winegard Technical Services with Customer’s name, address, and phone number. Customer must also provide proof of purchase to verify 
the product is under warranty. If the product is returned before the expiration of the warranty period,  
   Winegard Company will (at its option) either repair or replace the product. This Limited Warranty does not apply if the product has been damaged, 
deteriorates, malfunctions or fails from: improper installation, misuse, abuse, neglect, accident, tampering, modification of the product as originally 
manufactured by Winegard in any manner whatsoever, removing or defacing any serial number, usage not in accordance with product instructions or 
acts of nature such as damage caused by wind, lightning, ice or corrosive environments such as salt spray and acid rain. 
 

 

                                

RETURN AUTHORIZATION POLICY 

   A Return Material Authorization (RMA) is required prior to returning any product to Winegard Company or Winegard Warranty Services under this 
warranty policy. Please call our Technical Services Department at (800) 788-4417 or send an e-mail to 

[email protected] 

to obtain the RMA 

number. Please furnish the date of purchase when requesting an RMA number. Enclose the product in a prepaid package and write the RMA number 
in large, clear letters on the outside of the package. To avoid confusion or misunderstanding, a shipment(s) without an RMA number(s) or an 
unauthorized return(s) will be refused and returned to Customer freight collect. 
   WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY 
OTHER PERSON. 
   ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR 
PURPOSE AND MERCHANTABILITY ARE LIMITED TO THE TWO YEAR PERIOD OF THIS WARRANTY. 
   In states that do not allow limitations on implied warranties, or the exclusion of limitation of incidental or consequential damages, the above limitations 
or exclusions do not apply.  
   Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of incidental or consequential damages, so 
the above limitations or exclusions may not apply to you.  
   This warranty gives Customer specific legal rights. Customer may also have other rights that may vary from state to state.                            

 Rev. 2/08 

 

   

 Winegard Company, 3000 Kirkwood St., Burlington, IA 52601, 319/754-0600, Fax 319/754-0787   

www.winegard.com

     VS5312A   2452156

 

 

Summary of Contents for VS5312A

Page 1: ...e antenna input connection on the back of the second TV STEP 3 Connect the coax cable from the output on the switch box marked To VCR TV3 to the input connection on the back of the VCR If not using a VCR see STEP 7 STEP 4 Connect the coax cable from the output of the AUX SOURCE or VCR to the coax connection on the back of the switch box marked FROM VCR STEP 5 Connect the coax cable from the exteri...

Page 2: ...plified or non amplified contact the manufacturer or your local dealer FIG A AMPLIFIED TV ANTENNA FIG B NON AMPLIFIED TV ANTENNA BYPASS WALL MOUNTED POWER SUPPLY 12 VDC must be hooked up to power the antenna RED wire to Positive Black wire to Negative 12 VDC must be hooked up to power the antenna RED wire to Positive Black wire to Negative Figure A CONNECTING AN AMPLIFIED TV ANTENNA AND BYPASSING ...

Page 3: ...VCR input on the VIDEO SWITCH and the Auxiliary equipment connected in its place RECORDING STEP 6 To record programming from the Antenna Satellite Antenna Cable TV or Auxiliary simply press the appropriate button above the section marked VCR TV3 To record programming from the TV antenna to your VCR press the TV ANT button above the VCR TV3 section on the switch box To record programming from the S...

Page 4: ...nctions or fails from improper installation misuse abuse neglect accident tampering modification of the product as originally manufactured by Winegard in any manner whatsoever removing or defacing any serial number usage not in accordance with product instructions or acts of nature such as damage caused by wind lightning ice or corrosive environments such as salt spray and acid rain RETURN AUTHORI...

Reviews: